Config ID 887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
Getting Started
  1. Verify your Apprise API Status:

  2. The following is your Apprise Configuration ID: 

    887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
    For some examples on how to build a development environment around this: click here.

  3. In the future you can return to this configuration screen at any time by placing the following into your browser: 
    https://apprise.ergoproxykilla.duckdns.org/cfg/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
  4. Use the settings Configuration section to prepare and save your Apprise configuration.
    lightbulb_outlineYou can always refer to the build Apprise URL Builder if you're having troubles assembling your URL(s).
  5. Use the web Review section to review what was parsed/detected from your defined configuration.
  6. Use the announcement Notifications section to test out your saved configuration.
    lightbulb_outline: The number also provided in the announcement Notifications tab identifies how many notifications will be sent (based on tags/configuration provided) when using this section.
Working Remotely With Your Configuration
Using The Apprise CLI

The following command would cause apprise to directly notify all of your services: 

apprise --body="Test Message" \

                   apprises://apprise.ergoproxykilla.duckdns.org/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32/?tags=all
Send one or more attachments like this: 
apprise --body="Test Message" \

                   apprises://apprise.ergoproxykilla.duckdns.org/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32/?tags=all \

                   --attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png

                   --attach=/path/to/an/attachment.jpeg

The following command would cause apprise to retrieve the configuration loaded and send a test notification to all of your added services: 

apprise --body="Test Message" --tag=all \

                   --config=https://apprise.ergoproxykilla.duckdns.org/cfg/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
You may also create an Apprise configuration file that contains this line somewhere in it: 
include https://apprise.ergoproxykilla.duckdns.org/cfg/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
By leveraging the include directive, it will automatically be referenced for future calls to the apprise tool. All future calls using Apprise now simplify to: 
apprise --body="Test Message" --tag=all
Using CURL

The following command would cause the Apprise API to notify all of your services: 

curl -X POST \

                       -F "body=Test Message" \

                       -F "tags=all" \

                       https://apprise.ergoproxykilla.duckdns.org/notify/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
When sending attachments, curl requires all local files be prefixed with @. You can an add attachment like this: 
curl -X POST \

                  -F "tags=all" \

                  -F "body=Test Message" \

                  -F attach=@Screenshot-1.png \

                  https://apprise.ergoproxykilla.duckdns.org/notify/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
When sending more than one attachment, you must uniquely assign each attachment to a new ID. The example below leverages attach1 and attach2: 
curl -X POST \

                  -F "tags=all" \

                  -F "body=Test Message" \

                  -F attach1=@Screenshot-1.png \

                  -F attach2=@/my/path/to/Apprise.doc \

                  https://apprise.ergoproxykilla.duckdns.org/notify/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
Sends a notification to our endpoints with an attachment and no body specified: 
curl -X POST \

                   -F "tag=all" \ 

                   -F "attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png" \ 

                   https://apprise.ergoproxykilla.duckdns.org/notify/887e98da90b07bef2c22a88f81be8bdaadae35e3eb33d75ff744e0b1ebdbbf32
Configuration

Define your configuration below:

Apprise URL Builder build

Once you have successfully loaded at least one Apprise URL on the settings Configuration section, your loaded entries will display here.

Loaded Configuration

0 notification(s) selected for sending

  • Review the parsed destinations below before sending.
  • Select a tag (🏷️) on any entry to include it in announcement Notifications.
  • Use send to run a quick test and inspect the full debug output for that entry.
  • Need more destinations? Add or update them in settings Configuration.
Notifications
You can send a notification using the loaded configuration:
No Notification Targets Selected
Choose one or more tags from the Tags dropdown, select target entries from the web Review section, or add more entries in the settings Configuration section.
Clear Form restore_page